No lawn mower will run without gasoline in the armoured combat vehicle , so always check the fuel level before using the mower . If the wrong fuel was added to the tankful , this will cause the lawn mower to block up running , or in some case , not run at all . But the cognitive operation to remove the wrong fuel is straightaway .
Step 1
Locate the fuel tank on the lawn mower . Many mowers turn up the fuel tank under the hood of the mower , although some will place the armoured combat vehicle under the seat .
Step 2
settle the fuel line connexion on the tank . This connectedness will be on the bottom of the tank .
Step 3
Place the pail under the cooler ’s fuel credit line connection . On some mowers this can not be done because of the position of the connection . For these lawn mower the fuel line connection on the locomotive will have to be used .
Step 4
Remove the fuel line from the armored combat vehicle or engine by squeezing the clamp on the fuel line with the plyers and slew it away from the tank or locomotive engine . Then joggle the assembly line off of the fuel dig on the tank or locomotive engine .
Step 5
Allow the fuel arrangement to wholly drain . Remove the fuel detonator to hasten this process .
Step 6
Remove the stadium from the bottom of the carburetor . The carburetor is located where the fuel line colligate to the engine . Most fuel bowls have a meat nut that hold them to the carburetor . Use the adjustable wrench to remove the roll .
Step 7
pass over the bowl sporting with report towel . This will remove the bulk of the wrong fuel from the fuel bowl .
Step 8
Reinstall the fuel sports stadium to the carburetor . Do not pass over - string the bolt when reinstall . ( crabby - threading is when the train of thought of the thunderbolt swerve new yarn across the threads of the yap where the bolt of lightning is installed . ) Cross - threading the bolt will not grant the fuel bowl to varnish decent and necessitate the carburetor to be replaced .
Step 9
Reinstall the fuel line to the tank or locomotive connection by pressing the fuel line back on the barb and then sliding the clinch back over the barb .
Step 10
sate the tank with the proper fuel .
Tip
Fuel line dry cleaner can be added to the correct fuel to help further clean the fuel system .
Warning
check that to properly dispose of the fuel that came out of the fuel system . If the mower ran with the incorrect fuel , have it checked by a minor engine machinist .
